Power Cable Jib Tower Crane QTZ160 With Remote Control And Block
1. The main stressed steel parts of QTZ160 tower crane use Q345B
steel, the tower body mast section 1.835m*1.835m*2.5m, using
on-chip-type or standard mast section of two forms of production.
2. Light weight, air resistance is small, convenient
transportation. Rotation adopts double rotary organization. Lifting
mechanism is driven by frequency converted motor, running steady.
|Rated Lifting Moment (KN.M)||1600|
|Rated Loading Capacity (t)||10|
|Max. Lifting Load (t)||10|
|Tip Load (t)||2.4|
|Max. Lifting Height (m)||200|
|Free standing height (m)||50|
|Rope length (m)||500|
|Working range (m)||3 to 60|
|Slewing speed (r/min)||0-0.6|
|Trolley peed (m/min)||0-60|
|Jacking-up speed (m/min)||0.4|
|Counter jib length (m)||14.6|
|Power supply||380V/50Hz or according to client's requirements|
|Power Capacity (kw)||61.5|
|Electric switch box||Schneider|
|Main Material (mm)||125*14 /two angle steel with rib|
|Mast section (m)||1.835*1.835*2.5|
1. The tower crane is a combination of advanced technologies of the
2. It is equipped with a hydraulic self-raising mechanismand
afrequency-converting slewing mechanism.
3. The electric control system of the tower crane adopts the
advanced “PLC + frequency converter” control mode of the present
day, which has realized the stepless speed regulation and greatly
improves the reliability, maneuverability and stability of the
control system and the work efficiency of the tower crane.
4. The tower crane is equipped with all kinds of reliable safety
devices, such as hoisting height limiter, slewing range limiter and
multifunctional limiter to control the load moment, hoisting
capacity and trolley traveling range.